Because they press down on the brake pads to generate friction with the rotors, brake callipers are an essential part of your car’s braking system. Over time, however, they may experience a number of issues that might impair the overall braking capabilities of your car. In this post, we’ll go over typical problems with brake callipers and how skilled technicians can fix them.

Calipers that stick

Sticking or seizing is one of the most common issues with brake callipers. There is continuous friction between the pads and rotors as a result of the caliper’s inability to completely retract after braking. Brake system overheating, increased brake pad wear, and a tugging feeling to one side when driving are some of the symptoms. Professional mechanics often use visual examination to detect stuck callipers. They inspect the caliper slides for dirt or corrosion. They could lubricate the caliper pins or, in extreme circumstances, suggest a new caliper if they find problems.

Brake fluid leakage

Leaking brake fluid is another frequent problem that is often brought on by corroded caliper bodies or defective seals. The reservoir’s fluid level may drop due to a brake fluid leak, raising the possibility of brake failure. Low brake fluid levels and a mushy brake pedal are warning indicators. In these situations, qualified mechanics first make sure there is a leak and check the seals for damage. To guarantee long-term operation, they could rebuild the caliper and replace the seals, depending on how bad the damage is, or they might decide to replace the caliper entirely. Opting for the Auto Repair in Leander, TX  based service would be the best here.

Inequitable Brake Wear

Uneven brake wear may indicate issues with the caliper’s operation. One brake pad wearing down more rapidly than the other might be one way this shows itself. A stuck caliper or broken brake components are only a few of the possible causes. Usually, mechanics check the braking system to see whether the caliper is operating correctly. They will clean and lubricate the parts or, if required, replace the caliper if they discover that it is stuck. In order to restore the best possible braking performance, they will also advise replacing brake pads that are unevenly worn.

Brakes That Make Noise

Brake caliper problems may also be indicated by squeaking or grinding sounds made during braking. When the caliper itself is deteriorating or the brake pads are worn, noises often occur. To identify the problem, skilled technicians will do a comprehensive examination of the braking parts. They may replace any broken components if the caliper is the cause of the issue, making sure that new brake pads are put for a successful repair.

Preventive Upkeep

In order to avoid typical caliper issues, it is important to think about preventative maintenance. The lifetime of brake calipers may be increased by regular brake checks, appropriate cleaning, and lubrication. In order to identify wear indicators early on and prevent more severe problems, mechanics often advise regular inspections during vehicle maintenance. You can guarantee that your braking system is secure and efficient by being proactive and taking quick care of little issues.